VetroLiquido PRPis a single-component, transparent, satin-finish and matte synthetic paint based on synthetic polymers and modified natural polymers, designed to protect the final decorative layer of Microcem-FB, Cemento 3D, MarmUra, Etna, Terra Veneziana, Ardhea, Hiridium, and ArchiMetal. It forms a virtually neutral film that provides long-lasting protection for coatings inside swimming pools, tubs, fountains, furniture, doors, areas with high levels of condensation, floors, and wall coverings.

VetroLiquido PRP is the ideal solution for the long-term protection of continuous, vertical and horizontal, internal and external surfaces.

The technology used to produce VetroLiquido PRP gives it the following physical and chemical properties:

Good resistance to acidic and basic solutions;

Resists high temperatures;

Resists temperature changes;

Resists chlorine and marine environments;

Resists ultraviolet rays and ozone;

Good resistance to atmospheric agents

Good resistance to environments with high condensation;

Reduces the growth of mold and algae;

Resists chlorinated, ozonated, and salt water.

Resistant to abrasion and corrosion, it protects against graffiti;

Substantially reduces bacterial growth, improving hygiene;

Makes treated surfaces hydrophobic and oleophobic;

Reduces the adhesion of dirt and pollutants, making cleaning easier and dustproof.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

We recommend contacting our technical support team to ensure a perfect base before starting work.

VetroLiquido PRP is ready to use and does not require dilution.

Mix the product thoroughly before use.

Apply a first coat of VetroLiquido PRP using a short-haired (mohair) roller over approximately 1/2 m², then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C).

Apply a second coat of VetroLiquido PRP as described for the first.

Let the product dry for 48 hours (+20°C).

Color: Characteristic;

Version: Satin 60 gloss and matte 20 gloss;

Resistance: UV-resistant, non-yellowing;

Wear resistance: High impact resistance AR0.5;

Dilution: Ready to use;

Coverage: ±7-8 m²/l for two coats depending on absorption and application tool used;

Drying at +20°C and 65% RH: Dust-dry after 1 hour, touch-dry after at least 2 hours, and thoroughly dry after 24 hours;

Slip resistance: DIN 51097 Class A method 12° ≤ α < 18° - Non-slip (DIN 51130): R11;

Specific weight: 0.800 kg/l ± 0.05 at 20°C;

Spray application: With pressurized equipment; 1.5–2 mm nozzles, 3–4 bar pressure, 15–30 cm distance from the surface;

Airless spray application: nozzles with an approx. 0.45 mm orifice, 180 bar pressure; 68°–80° spray angle, 15–30 cm distance from the surface;

Tool cleaning: With synthetic thinner;

Packaging: 2.5 L and 1 L (15 kg upon request);

Storage: 12 months in the original, tightly closed containers in a cool, dry place;

VOC classification (Legislative Decree 161 of March 27, 2006): Product for professional use only;

Land transport: ADR/RID: The product travels in ADR containers;

Customs Code 3208 9099: Paints based on synthetic polymers or modified natural polymers, dispersed or dissolved in a non-aqueous medium;

UFI Code: HXJ0-Q0P5-300V-WGDG.

Important Notes:

Avoid application on surfaces excessively heated by the sun, on frozen substrates, or where there is a risk of frost or rain during drying.

Apply when relative humidity is below 65% and at least 4 degrees above the dew point.

Overcoating times are significantly affected by the thickness applied, temperature, and ventilation during drying; variations in these parameters could extend drying times.

If drying times are not respected, the applied product may wrinkle, crack, form streaks, halos, change color, or lift.

Swimming pool use:

Maintain optimal pool water characteristics even during periods of non-use.

Water pH between 6.5 and 7.5;

Free active chlorine between 0.7 and 1.5 ppm;

Temperature between 18°C ​​and 30°C;

Avoid direct contact of concentrated chemicals (pH adjusters, disinfectants, etc.) with the coating.

Chlorine-based chemical shock treatments may reduce the coating's lifespan and compromise its aesthetics.

Recommended application temperatures are between +10°C and +30°C for both the substrate and the surrounding environment.

Limitations of use:

The worst damage is often caused by a lack of professionalism: the limitations are therefore one's own knowledge.

A feasibility study of the substrates, the environment, the products, and site safety must be the primary considerations for the applicator in every application.

It is advisable to draw up a site report with the client, highlighting any pre-existing defects in the work or, for example, difficulties in reaching certain areas.

Other limitations, technical ones, are based on the humidity and temperature of the environment and the substrate, as already mentioned.

Experience with this technology has not yet revealed any application limitations to be noted. Please note that these systems do not adhere to plastics and PVC sheeting.

For proper drying, we recommend applying a thickness of up to 40 µm per coat. Filling of swimming pools, basins, fountains, etc., must occur after the finish has fully hardened, at least 15 days after application of the final coat at +20°C and 65% RH; at lower temperatures, the application time should be extended.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.