Elastic and eco-friendly water-based primer
NK PRIMER
The bridge between the substrate and the finish. A ready-to-use, elastic primer that smoothes the surface, designed to improve adhesion on absorbent and non-absorbent surfaces.
Application
Uno strato
Appearance
Ready-to-use liquid
Yield
8 m²/L
Packaging
7 L and 2,5 L
Elasticity, adhesion, uniformity
The base becomes
uniform.
"A well-prepared surface makes any finish more reliable."
Primer NK creates a flexible and long-lasting bond, capable of working on a wide variety of substrates. It evens out the substrate's absorption and promotes the adhesion of subsequent coatings.
The eco-friendly, water-based formulation contains resins, silica aggregates, marble chips, inorganic pigments, and specific additives. It is ready to use and, when necessary, can be diluted up to 10% with drinking water.
01
Elastic adhesion bridge
It promotes extraordinary adhesion on absorbent and non-absorbent surfaces, both internal and external.
02
Evens out absorption
It regulates the behaviour of the support and improves the continuity of the subsequent decorative layers.
03
Ready to use
It does not require complex mixing: it can be applied directly with a roller or brush.
04
Biological protection
Specific additives help prevent the formation of mold, fungi, algae and moss over time.
Applications
Uniform surfaces.
Long-lasting adhesion.
Primer NK is suitable for new and renovation cycles, indoors and outdoors, on mineral surfaces, tiles and other difficult-to-treat substrates.
01
Internal and external walls
02
Interior and exterior floors
03
Tiles and ceramics
04
Concrete and plaster
05
Bricks and plasterboard
06
Glass and compact surfaces
Application cycle
Even out the surface.
Promote adhesion.
Primer NK is applied in a single, uniform coat with a roller or brush. The indicative coverage is approximately 6–8 m²/L, with an average thickness of approximately 300 μm. Recoat after 24 hours at +20°C.
01
Preparation
Check that the substrate is dry, solid, seasoned and free from dust, paint, wax, oil and loose parts.
02
Evens out absorption
Apply Primer NK in a single coat with a stainless steel trowel, using one or two colours.
03
Application
Apply a single coat evenly over the entire surface using a roller and brush.
04
Dust off
Under standard conditions the product is dust-free after approximately 3 hours.
05
Overlay
Allow to dry for 24 hours at approximately +20°C before applying the next coating.
06
Overlay
Suitable for the entire Nikkolor Italia product line.
Essential data
Resins and aggregates.
Elastic adhesion.
These essential data are indicative: perception varies depending on the light, application technique, and texture orientation.
Superficial interpretations
Membership Promoter
Improves the anchoring of subsequent coatings even on difficult and poorly absorbent surfaces.
Uniforming primer
It evens out absorption and makes the surface's behavior more homogeneous.
Elasticity of the system
The elastic component accompanies the support and contributes to the continuity of the applied cycle.
Let's discuss your project