ProteKto EcoSilanis a colorless finish composed of a chain of silicon atoms and nano particles and a blend of silanes and siloxanes in an aqueous emulsion, it penetrates deep into the capillaries of the substrate making it hydrophobic and at the same time breathable, non-film-forming with permanent action, resistant to UV rays, does not yellow in any environmental and aging conditions, leaves the surfaces treated in a natural way, it is an ecologically sustainable and advanced product, does not contain added *Formaldehyde and **APEO, with very low VOC content.

ProteKto EcoSilanis designed for protecting and decorating MarmUra, Cemento 3D, Marmorino Lime, Etna, Terra Veneziana, Marblex Mirror, LimeWash Paint, ArchiMetal, and Microcem-FB coverings. Its applications include shops, warehouses, hospitals, bars, restaurants, mechanical, pharmaceutical, and food industries, and private homes.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

We recommend contacting our technical support team to ensure a perfect base before starting work.

Ready-to-use product; mix thoroughly before use.

Apply ProteKto EcoSilan using a synthetic brush, using crisscross, transverse, horizontal, and vertical strokes to allow the product to penetrate deeply into the substrate.

Let dry for 12 hours (+20°C).

Apply a second coat of ProteKto EcoSilan as described for the first coat.

The second coat should be applied 12 hours after application and within 24 hours of the first coat (+20°C).

Do not apply if rain is imminent.

After applying ProteKto EcoSilan, no other water-based products can be applied.

Application temperature: between +5°C and +30°C, and at least 4 degrees above the dew point.

Avoid application on surfaces excessively heated by the sun, on substrates, and/or on frost.

Appearance: Liquid;

Specific gravity: 1.00 ± 0.05 kg/l at 20°C;

Composition: Silicon atoms, nanoparticles, blend of silanes, siloxanes in aqueous emulsion;

Basic colors: Characteristic;

Achievable colors: Not colorable;

PH: > 9.00;

VOC classification: 8.6 g/l;

Coverage: 10 m²/L in two coats, depending on substrate absorption;

Dilution: Ready to use;

Use temperatures: +10°C and +30°C;

Drying: Touch dry in 2 hours, through dry in 24 hours at 20°C;

Application: Roller, brush, airless spray;

Tool cleaning: Water;

Odor: Odorless;

Packaging: 2.5 L;

Cleaning instructions: Clean with a damp microfiber cloth;

Storage: Store in tightly closed original packaging in a dry place between +5°C and +30°C;

Washing resistance: Resistant to washing > 15,000 cycles (Gadner UNI 10795 UNI 10560);

Water vapor permeability: High UNI 10795 UNI EN ISO 7783-2;

Alkali resistance: UNI 10795;

Dirt pick-up: Low UNI EN 10792;

According to the UNI EN 1062-3 standard, a W24 value < 0.1 is classified as Class III, corresponding to low water absorption;

Safety (per EEC regulation): The product is not flammable or dangerous;

Precautionary statements: Not subject;

Risk phrases: Not subject;

Land transport ADR/RID: Not subject;

Symbols: The product does not require labeling pursuant to Legislative Decree No. 65 of March 14, 2003, and subsequent amendments and updates.

It is water-based for a more environmentally friendly treatment;

Easy to apply;

Natural effect;

Does not noticeably alter the aesthetic appearance of the treated surface;

Reduces the adhesion of mold and algae, providing breathable, long-lasting, and restorable protection;

Prevents water penetration and helps keep the treated surface clean;

Does not yellow under any environmental or aging conditions;

Provides protection for historic buildings or buildings of particular architectural value;

Does not form a surface film;

Has high penetration capabilities;

Does not alter the aesthetic appearance of the substrate;

Not hazardous under current European regulations on the classification of preparations;

Can be applied both indoors and outdoors.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.