The sandblasted series par excellence, Perla d'Oriente transforms into haute couture for design, a dream come true. A line of pearly metallic effects, a symphony of lights that dress the essence of elegance and illuminate its nuances with an enchanting effect. Water, its secret formula, a harmony with the environment, a respectful choice, low VOC content, air quality thanks you, and the protection of installers is guaranteed. Formaldehyde, banished from this marvel, a safe work for those who love purity. Colors that resist time and sunlight, the vibrant finish remains intact, untarnished.

Much more than a simple decorative element: it is a refined combination of elegance and mystery, capable of lending an exotic and sophisticated touch to any space.

Inspired by the ancient beauty of the Orient, this creation enchants with its precious finishes, meticulous details, and delicate balance between tradition and modernity.

Perfect for those who love unique and charming objects, Perla d'Oriente illuminates spaces with its exclusive aura, transforming every corner into a small masterpiece of style.

A special resin emulsion, a blend of natural biostable micas, crystal microspheres, pigments, and additives, make Perla d'Oriente a decorative, sandblasted finish that's quick and easy to apply, non-toxic, non-yellowing, permeable to water vapor, and resistant to fungi and bacteria.

Perla d'Oriente is an environmentally sustainable and advanced product, free of *added formaldehyde and **APEO, and has a very low VOC content.

Ideal for covering interior walls and ceilings for high-end design and renovations in public and private spaces, shopping centers, shops, bars, villas, and residences.

The unique feature of the completely seamless design allows for seamless solutions, a true innovation in modern architecture. This refined finish creates a velvety effect, lending three-dimensionality to the surfaces it covers, with a soft, smooth feel.

The product is ready to use, mix well before use.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface to be treated using a short-haired roller and a brush.

Let dry for 24 hours (+20°C).

Apply a first coat of Perla d'Oriente using a spalter brush, using crisscrossing movements over the entire surface to be treated.

Let dry for 12 hours (+20°C).

Apply a second coat of Perla d'Oriente as before.

Let dry for 24 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK diluted 30% with drinkable water evenly over the entire surface to be treated using a short-haired roller and a brush.

Let dry for 24 hours (+20°C).

Apply a first coat of Perla d'Oriente using a spalter brush, using crisscrossing movements over the entire surface to be treated.

Let dry for 12 hours (+20°C).

Apply a second coat of Perla d'Oriente as before.

Let dry for 24 hours (+20°C).

Apply a first coat of VetroLiquido PRP using a short-haired roller (mohair) for approximately 1/2 m2 and immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C);

Apply a second coat of VetroLiquido PRP as described for the first;

Let the product dry for 24 hours (+20°C);

Apply a third coat of VetroLiquido PRP as described for the second;

Let the product dry for 48 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

Lay out the 70/80 g/m2 fiberglass mesh, taking care to position it so that it does not crease, overlapping the ends of the mesh by at least 10 cm.

Apply a first coat of Primer Beton using a stainless steel trowel, evenly and evenly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Apply a second coat of Primer Beton as previously.

Let the product dry for 24 hours (+20°C).

Apply a single coat of Primer NK diluted 30% with drinking water, evenly over the entire surface to be treated, using a short-haired roller and a brush.

Let it dry for 24 hours (+20°C).

Apply a first coat of Perla d'Oriente using a spalter brush, using crisscrossing movements over the entire surface to be treated.

Let it dry for 12 hours (+20°C);

Apply a second coat of Perla d'Oriente as before.

Let it dry for 24 hours (+20°C).

Apply a first coat of VetroLiquido PRP using a short-haired roller (mohair) over approximately 1/2 square meter, then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let it dry for 12 hours (+20°C);

Apply a second coat of VetroLiquido PRP as before.

Let it dry for 24 hours (+20°C);

Apply a third coat of VetroLiquido PRP as before.

Let it dry for 48 hours (+20°C).

Appearance at +23°C: Creamy;

Specific gravity: 1.100 +/- 5% kg/L.

Composition: Resin emulsion, mix of natural biostable micas, crystal microspheres, various additives;

Base colors: Silver, White Pearl, Oro Ducale, Aluminio, Platinum;

Colors obtainable with toner: 32 shades;

Viscosity at +23°C: ≈ 4300 cps ± 5% G6 RPM 100 at 25°C;

pH: > 9.00;

VOC classification: 8.6 g/L;

Coverage: 12 m²/L in two coats, depending on substrate absorption;

Dilution: Ready to use;

Use temperature: +10°C and +35°C;

Drying time: Touch dry 1 hour, thoroughly dry 24 hours at 20°C;

Application: Spalter brush, roller, and stainless steel trowel;

Tool cleaning: Water;

Packaging: 2.5 liters;

Cleaning instructions: Clean with a damp microfiber cloth.

Storage: In tightly closed original packaging and in a dry place between +5°C and +30°C;

Washing resistance: Resistant to washing > 30,000 cycles Gadner UNI 10795 UNI 10560;

Water vapor permeability: High UNI 10795 UNI EN ISO 7783-2;

Alkali resistance: UNI 10795;

Dirt pick-up: Low UNI EN 10792.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.