In our research into new materials and technologies for creating high-performance finishes, we have synthesized a new, ultra-small zirconium-based particle in our laboratory. Thanks to the nano-resin treatment present in the product, we can achieve a finish whose surface treatment exhibits exceptional technical and physical properties.

The nuances and oxidations, the result of a controlled and artisanal process, give depth and character to every surface, evoking industrial, historical, and highly distinctive atmospheres. Ideal for those seeking a visually striking, timeless material effect, Ferro Patinato combines durability, authenticity, and an aesthetic capable of transcending fashions to remain relevant throughout the ages.

Each patina is unique, unrepeatable, like a mark of time that interacts with the space, making walls, furnishings, and accessories the true protagonists of the space.

Ideal for covering interior walls and ceilings for high-end design and renovations in public and private spaces, shopping centers, shops, bars, villas, and residences.

The unique feature of the completely seamless finish allows for seamless solutions, a true innovation in modern architecture, a refined finish capable of creating unique textures, transforming surfaces into real metal of extraordinary beauty and absolute exclusivity.

Realistic and natural metal look

Seamless, seamless surface

Highly resistant and durable

Applicable to interior and exterior walls, furniture, and decorative panels.

Pour the metal powder "Comp. B" in small doses into the "Comp. A" and mix using an electric mixer with a special whisk until you obtain a smooth, lump-free paste. If necessary, add drinking water until you obtain a soft paste.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface using a short-haired roller and a brush.

Let dry for 24 hours (+20°C).

Apply a single coat of Hiridium, approximately 1 mm thick, using a stainless steel trowel, evenly and smoothly over the entire surface.

Let dry for 24 hours (+20°C).

Apply a single coat of Patina in the chosen color (Blue, Green, Red) using a soft sponge.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface using a short-haired roller and a brush.

Let it dry for 24 hours (+20°C).

Apply a single coat of Hiridium, approximately 1 mm thick, using a stainless steel trowel, evenly and evenly over the entire surface.

Let the product dry for 24 hours (+20°C).

Using an electric polisher connected to a vacuum cleaner, attach the 1000-grit silicon carbide polishing disc and polish the entire surface.

Polish the surface again as before, but replace the silicon carbide polishing disc with a 3000-grit disc.

Apply a single coat of Patina in the chosen color (Blue, Green, Red) using a soft sponge.

Let dry for 24 hours (+20°C);

Apply a generous coat of ProteKto EcoSilan using a short-haired mohair roller;

Let dry for 24 hours (+20°C);

Polish the surface again as before using a 3000-grit silicon carbide polishing disc;

Apply a first coat of VetroLiquido PRP using a short-haired mohair roller for approximately 1/2 square meter, then smooth the product with a stainless steel trowel to eliminate any bubbles;

Let dry for 12 hours (+20°C);

Apply a second coat of VetroLiquido PRP as you did with the first;

Let dry for 48 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

Lay out the 70/80 g/m² fiberglass mesh, taking care to position it so that it does not crease. Overlap the ends of the mesh by at least 10 cm.

Apply a first coat of Primer Beton using a stainless steel trowel, evenly and smoothly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Apply a second coat of Primer Beton as before.

Let the product dry for 24 hours (+20°C).

Let it dry for 24 hours (+20°C).

Apply a first coat of Hiridium using a stainless steel trowel, evenly and smoothly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Apply a second coat of Hiridium as before;

Let the product dry for 24 hours (+20°C);

Using an electric polisher connected to a vacuum cleaner, attach the 1000-grit silicon carbide polishing disc and polish the entire surface;

Polish the surface again as before, but replace the silicon carbide polishing disc with a 3000-grit disc;

Apply a single coat of Patina in the chosen color (Blue, Green, Red) using a soft sponge;

Let it dry for 24 hours (+20°C);

Apply a generous coat of ProteKto EcoSilan using a short-haired Mohair roller;

Let it dry for 24 hours (+20°C);

Polish the surface again as before, using the silicon carbide polishing disc and a 3000-grit disc;

Apply a first coat of VetroLiquido PRP using a short-haired (mohair) roller for approximately 1/2 square meter, then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C).

Apply a second coat of VetroLiquido PRP as described for the first.

Let the product dry for 48 hours (+20°C).

Viscosità (UNI EN ISO 3219): ~130000 mPa*s;

Peso Specifico (UNI EN ISO 2811-1): ~Kg 3 (Comp. A kg 1,5 - Comp. B kg 1,5);

Diluizione dopo il dosaggio: pronto all'uso o in alcuni casi si può aggiungere dell'acqua potabile in percentuale necessaria per il tipo di applicazione che si desidera ottenere;

Resa: ~9 m² (in funzione alla texture applicata la resa può diminuire notevolmente);

pH: ~9,00;

Attrezzi consigliati per l'applicazione: frattone, pennello, rullo e spruzzo;

Tempo di essiccazione dello strato: ~8 ore (+20°C);

Tempo di essiccazione prima della lucidatura: ~12 ore (+20°C);

Indurimento totale: ~72 ore (+20°C);

Confezioni: Comp. A kg 1,5 e Comp. B kg 1,5;

Resistenza all'acqua e ai raggi UV senza protezione: almeno dieci giorni dalla lucidatura finale;

Classificazione per impiego finale (UNI EN 1062.1-4.1): Decorazione e Protezione;

Classificazione per tipo di legante (UNI EN 1062.1-4.2): Nonoresina;

Classificazione per stato (UNI EN 1062.1-4.3): Dispersione Acquosa;

Classificazione COV: Conforme al D.L. n°161 del 27/03/2006 (Attuazione Direttiva 2004/42/CE);

Conservazione in confezioni originali ben chiuse ed in luogo asciutto tra +5°C e +30°C.

Appearance: Liquid;

Color: Blue, green, and red;

pH: ~3/3.2;

Specific gravity: 1000 ± 40 g/L (at 20°C);

Solid content: 19.8 ± 2%;

Coverage: 8/12 m²/L depending on the quantity used;

Application: Brush, sponge, spray, airless;

Packaging: 1 Lt.

Le indicazioni tecnico-applicative scritte e verbali fornite agli acquirenti e agli installatori si basano sulle nostre esperienze e sull'attuale stato dell'arte a livello teorico e pratico; esse non sono vincolanti e non prefigurano alcun vincolo contrattuale o impegno secondario derivante dal contratto di acquisto. Esse non esonerano l'acquirente dal verificare personalmente e su propria responsabilità l'idoneità dei nostri prodotti allo scopo applicativo previsto. I cicli di lavorazione sopra indicati non costituiscono alcuna presa di responsabilità da parte di Nikkolor Italia s.r.l., che rimane sollevata da problematiche originate da pose non corrette.