Cemento Metallo is the perfect harmony between the solidity of concrete and the sophisticated brilliance of liquid metal, a decorative effect that expresses elegance and modernity with extraordinary intensity.

Its dynamic surfaces combine the materiality of concrete with iridescent metallic reflections, creating plays of light that lend depth and character to spaces.

Perfect for walls with a sophisticated design, Cemento Metallo transforms spaces into contemporary settings, where innovation meets refinement in a unique balance of strength and brightness.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

We recommend contacting our technical support team to ensure a perfect base before starting work.

The product is ready to use, but in some cases it can be diluted up to 10% with potable water.

Apply the product evenly to the entire surface to be treated using a short-haired roller and a brush.

Let dry for 12 hours (+20°C).

For 20 kg of product, pour 6 liters of drinking water into a clean bucket.

Add the desired amount of toner and mix until the color is dissolved.

Add the Cemento 3D in small doses and mix thoroughly using a mechanical mixer until a smooth, lump-free paste is obtained. The Cemento 3D is now ready for application.

Apply a single layer of Cemento 3D over 2-3 m² using a stainless steel trowel. Use a doormat pad to draw on the product while it is still wet to create the desired texture.

Before the product dries, gently smooth the surface using a stainless steel trowel, taking care to flatten only the protruding parts.

Let dry for 24 hours (+20°C).

The product is ready to use and does not require dilution.

Apply a single layer of Decor Fix using a brush, following the previously created texture.

Spread the Daranà© foil over the still-wet Decor Fix, overlapping the foils by 1 cm.

Proceed with this method over the entire surface to be decorated.

Let dry for 2 hours (+20°C).

Remove the Daranà© foil from the surface.

Let dry for 24 hours (+20°C).

To make the surface washable, apply a single coat of ProteKto EcoSilan as follows:

Apply a single coat of ProteKto EcoSilan using a brush, taking care to follow the previously created texture.

Let the product sit for about five minutes (this may vary depending on the ambient temperature and/or season), and gently clean the surface using a soft cotton cloth.

Let it dry for 24 hours (+20°C).

Daranà© coverage: 14 m², variable depending on the texture used;

Daranà© size: 21 x 64 ml;

Color: Stainless Steel and Gold;

Packaging: 1 Daranà© foil 14 m² + 1 Decor Fix 1 L;

Do not apply the product at temperatures below +10°C or above +30°C.

Since its inception in 2015, Daranà© has been one of the most sought-after products on the national and international markets. This innovative and unprecedented application method is so unique that it is now protected by copyright at the SIAE in Rome, with these rights recognized in 200 countries worldwide.

Work registered with:

Italian Society of Authors and Publishers (SIAE) - General Management - 00144 Rome - Viale della Letteratura, 30 OLAF SECTION - Published Works Deposit Service. This acknowledges the deposit of the work in question, accepted pursuant to art. 67, letter b) of the SIAE Regulations and under the conditions established for the provision of the service described below. The deposit, identified by the reference number 2022/01949, is effective as of September 27, 2022.

The Daranà application method is protected by copyright. Protection under the Unfair Competition Act: The Daranà application method enjoys protection under the Unfair Competition Act. The use of protected terms, illustrations, and products, as well as the complete or partial, similar, or identical reproduction of the Daranà application method, is permitted only with the express permission of Nikkolor Italia s.r.l. This applies to all products and types of use, whether physical or digital. This applies regardless of whether this is undertaken for one's own use or for the use of third parties, or in any other publication or documentation.

The unauthorized import, export, or sale of this method is prohibited. To protect its intellectual property, Nikkolor Italia s.r.l. is obligated to prosecute and prevent any unauthorized use. Violation of industrial property rights and copyrights not only entails civil law consequences but also constitutes a criminal offense.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.