MarmUra is the perfect fusion of the solidity of ceramic and the brilliance of crystal, a decorative effect that embodies strength, durability, and uncompromising elegance.

Ideal for walls and floors, both interior and exterior, this covering gives spaces a bold and sophisticated character, thanks to its surface rich in luminous reflections and details sculpted into the material.

MarmUra expresses power and prestige, transforming any space into a masterpiece of contemporary design, capable of standing the test of time with an imposing and refined style.

MarmUra is a ready-to-use, single-component, ultra-thin ceramic paste with crystal microspheres, offering excellent performance in terms of yield, mechanical resistance, flexibility, and workability.

Thanks to the absence of epoxy resins, MarmUra is completely yellow-free and contains no cements or other hygroscopic components that can impair performance upon direct and prolonged contact with water.

The MarmUra system eliminates the pot-life problem found in epoxy resins and microcements. Once the container is opened, any remaining product, if tightly closed, undiluted, and properly stored, can be reused for up to 24 months.

MarmUra is resistant to mold, algae, and bacteria. In particular, it has an extraordinary ability to resist the spread of flames and the development of smoke. It is an environmentally sustainable and advanced product, contains no added *formaldehyde or **APEO, and has a very low VOC content.

MarmUra is made up of multiple products to meet the diverse needs of the market and make the system technically advanced. The aesthetically natural finishes can give a new look to residential, work, and commercial spaces. It can be applied non-invasively without demolition and reconstruction, with a thickness of less than 3 mm, using the complete system. MarmUra is classified A+ according to the French ministerial decree for indoor air quality.

Realistic and natural look

Seamless, seamless surface

Highly resistant and durable

Can be used on interior and exterior walls, furniture, and decorative panels.

The MarmUra container contains 7 liters of product and 2.1 kg of Crystal.

Pour the MarmUra into a clean bucket and add approximately 5% drinking water, mixing thoroughly using a mechanical mixer.

Add the crystals in small doses and continue mixing for about 3 minutes.

The product is now ready for application.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface to be treated using a short-haired roller and a brush.

Let it dry for 24 hours (+20°C).

Apply a first coat of MarmUra over the entire surface to be decorated using a stainless steel trowel.

Let the product dry for 12 hours (+20°C).

Apply a second coat of MarmUra as described above.

Let the product dry for 24 hours (+20°C).

To achieve a soft-touch surface, sand the surface gently and without applying pressure using a random orbital sander with 150-grit sandpaper.

Vacuum the surface thoroughly to remove dust.

Apply a generous coat of ProteKto EcoSilan using a short-haired Mohair roller.

Let dry for 24 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface to be treated using a short-haired roller and a brush.

Let it dry for 24 hours (+20°C).

Apply a first coat of MarmUra over the entire surface to be decorated using a stainless steel trowel.

Let the product dry for 12 hours (+20°C).

Apply a second coat of MarmUra as described above.

Let the product dry for 24 hours (+20°C).

To achieve a soft-touch surface, sand the surface gently and without applying pressure using a random orbital sander with 150-grit sandpaper.

Vacuum the surface thoroughly to remove dust.

Apply a first coat of VetroLiquido PRP using a short-haired (mohair) roller for approximately 1/2 square meter, then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C);

Apply a second coat of VetroLiquido PRP as described for the first;

Let the product dry for 24 hours (+20°C);

Apply a third coat of VetroLiquido PRP as described for the second;

Let the product dry for 48 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

Lay out the 70/80 g/m² fiberglass mesh, taking care to position it so that it does not crease. Overlap the ends of the mesh by at least 10 cm.

Apply a first coat of Primer Beton using a stainless steel trowel, evenly and evenly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Apply a second coat of Primer Beton as before.

Let the product dry for 24 hours (+20°C).

Apply a first coat of MarmUra over the entire surface to be decorated using a stainless steel trowel.

Let the product dry for 12 hours (+20°C).

Apply a second coat of MarmUra as before.

Allow the product to dry for 24 hours (+20°C).

For a soft-touch finish, sand the surface gently and without applying pressure using a random orbital sander with 150-grit sandpaper.

Vacuum the surface thoroughly to remove dust.

Apply a first coat of VetroLiquido PRP using a short-haired roller (mohair) over approximately 1/2 square meter, then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Allow the product to dry for 12 hours (+20°C).

Apply a second coat of VetroLiquido PRP as described for the first.

Allow the product to dry for 24 hours (+20°C).

Apply a third coat of VetroLiquido PRP as described for the second.

Allow the product to dry for 48 hours (+20°C).

Store MarmUra in a dry, dry place, away from sunlight;

Do not apply MarmUra to dusty surfaces;

Do not apply MarmUra to wet surfaces;

Do not apply MarmUra to frozen surfaces;

Do not apply MarmUra to still damp surfaces and restorations;

Do not apply MarmUra in strong sunlight (outdoor application);

Do not apply MarmUra in strong winds (outdoor application);

Do not apply MarmUra in rain (outdoor application);

Make sure the temperature does not drop below +10°C before applying MarmUra;

Do not apply MarmUra where rising or seeping damp has been confirmed;

Measure the humidity level at a depth of 4 cm using a carbide hygrometer to ensure it is less than 3%;

Check the local weather forecast (outdoor application);

Properly cover window frames, doors, etc. before applying MarmUra.

Tensile strength of MarmUra (EN 13892-2): 38 N/mm² at 28 days,

Compressive strength of MarmUra (EN 13892-2): 38 N/mm² at 28 days;

Flexural strength of MarmUra (EN 13892-2): 36 Nm at 28 days;

Impact resistance of MarmUra (UNI EN ISO 6272-1): 0.500/m Nm/501;

Resistance to permeability of MarmUra (UNI EN 1062-3): 0.0001 kg/m²*h0.5 at 5 days;

Reaction to fire of MarmUra (EN 13501-1) CLASS 1 after 28 days;

MarmUra adhesion strength to concrete (EN 13892-8): 6 N/mm² after 28 days;

MarmUra castor chair test (EN 425): absolutely no defects;

The minimum/maximum recommended thickness for the MarmUra application cycle is 3 mm.

MarmUra coverage may vary depending on the consistency, porosity, and condition of the surface, as well as the application method.

MarmUra performance tests were conducted in our laboratories (laboratory temperature +21°C - humidity 65%).

Slip resistance of MarmUra: DIN 51097 method Class A 19° ≤ α < 27° - Non-slip (DIN 51130): R11 - Environments for the production of food products, kitchens of catering establishments, work environments with a large presence of water and mud, clinics, laboratories, laundries, hangars.

Appearance: Paste;

Viscosity (UNI EN ISO 3219): ~ 130,000 mPa*s;

Specific Weight (UNI EN ISO 2811-1): ~ 1.5 kg/L ± 3%;

pH: > 9.00;

Color: White;

Colors obtainable with toner: 32 shades;

Dilution: 5-7% drinking water (Max 500 ml of drinking water for both coats);

Coverage: 20 m² for two coats;

Use temperature: +10°C and +30°C;

Touch dry: 3 hours at +20°C;

Walk dry: 48 hours at +20°C;

Full hardening: ~ 7 days at +20°C;

Overlaying furniture on a dry layer of VetroLiquido PRP: ~10 days at +20°C;

Full curing time: 28 days at +20°C;

Temperature resistance after curing: –20°C to +50°C;

Water and UV resistance after application of VetroLiquido PRP: ~10 days;

Packaging: 7 liters and 2.5 liters;

Shelf life: 24 months in unopened packaging, protected from UV rays and humidity;

Classification by end use (UNI EN 1062.1 – 4.1): Decoration and Protection;

Classification by binder type (UNI EN 1062.1-4.2): Acrylic nanoresin;

Classification by state (UNI EN 1062.1-4.3): Water dispersion;

VOC classification: Complies with Legislative Decree no. 161 of 03/27/2006 (Implementation of Directive 2004/42/EC).

Introduction:

Let's start by saying that the success of a floor depends largely on the substrate, the correct application method, and the mixing and installation phases. However, proper cleaning and proper maintenance of the floor is the responsibility of those who live with seamless surfaces. The more it is cared for, the longer the floor will last.

Advantages of MarmUra flooring:

The floor is very durable, but not as durable as a ceramic or stoneware floor. It can be repaired rather than completely replaced if the damage affects a very small area, and this is also a plus, but in any case, it must be applied by qualified professionals. It is not suitable for DIY.

Using the MarmUra floor:

In the first week after applying the complete cycle, it is very important not to clean the floor under any circumstances. Avoid spilling any liquid on the floor that could alter the color, lighten, or even bleach it. Avoid walking on the floor at all costs, as it has not yet reached its maximum hardness and chemical resistance.

Cleaning the MarmUra floor:

Start cleaning the floor by removing dust and dirt using a soft-bristled broom or a vacuum cleaner to gently sweep the surface. Be sure to cover the entire floor, including hard-to-reach areas such as corners. Mopping the floor without sweeping away dust and dirt can damage the surface layer over time, leaving it looking dirty even after thoroughly mopping.

Helpful tips for cleaning MarmUra floors:

Prepare a solution of warm water and neutral soap, following the manufacturer's instructions. Using a microfiber cloth, thoroughly clean the entire surface. Be sure not to overdo the detergent, as excessive amounts could leave residue on the floor. Neutral products are the best choice for interiors and home environments; they are simple, economical, and extremely effective.

Helpful tips for treating MarmUra floors:

Use a doormat outside the door. Use non-absorbent mats under the sink and washbasin. Use cotton or natural fiber mats; those made of rubber or synthetic fibers may release oil and stain the surface. Place shock-absorbent felt pads under the legs of chairs, tables, desks, and furniture. Use silicone rubber casters for office chairs. Clean up spilled liquids immediately; if left to settle, they could damage the floor's surface protection.

Take extreme care not to spill anything on the surface, including substances such as oils, perfumes, creams, grease, stucco, mortar, and paint, which could permanently damage the floor. Do not leave damp cloths on the floor. Never use abrasive or aggressive products such as wire brushes, sandpaper, hydrochloric acid, acetone, or ammonia, as their corrosive properties will damage the floor. Take extreme care when installing furniture (in any case, it is recommended to let the surface fully cure) and do not place objects on the floor. In fact, improperly curing the floor will result in unsightly stains, even after several days.

Do not drag any objects across the floor. Walk on the surface only with clean shoes. Avoid standing water and direct contact with moisture. Knowledge of the substrates and their suitability for the correct installation method and use of the products is the responsibility of the person performing the work. Proper treatment, maintenance, and cleaning of the surfaces is the customer's responsibility.

However, since we cannot intervene directly, the company assumes no responsibility for the conditions of the construction sites, the execution of the work, or the proper treatment, maintenance, and post-installation cleaning of the floors, as these are beyond our control. For any information, please contact our technical support team.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.