The power of metal transformed into a pure expression of design

With its bold character and sophisticated sheen, this decorative coating embodies strength, modernity, and innovation. Its metallic surfaces vibrate in the light, creating intense reflections and unexpected depths, perfect for visually striking environments.

Hiridium is more than just decoration, it's a statement of style: bold, futuristic, and imposing, for those who want to dominate the space with an uncompromising, industrial and contemporary aesthetic.

Ideal for covering interior walls and ceilings for high-end design and renovations in public and private spaces, shopping centers, shops, bars, villas, and residences.

The unique feature of the completely seamless finish allows for seamless solutions, a true innovation in modern architecture, a refined finish capable of creating unique textures, transforming surfaces into real metal of extraordinary beauty and absolute exclusivity.

Realistic and natural metal look

Seamless, seamless surface

Highly resistant and durable

Applicable to interior and exterior walls, furniture, and decorative panels.

Pour the metal powder "Comp. B" in small doses into the "Comp. A" and mix using an electric mixer with a special whisk until you obtain a smooth, lump-free paste. If necessary, add drinking water until you obtain a soft paste.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface to be treated using a short-haired roller and a brush.

Let dry for 24 hours (+20°C).

Apply a single coat of Hiridium, approximately 1 mm thick, using a stainless steel trowel, evenly and smoothly over the entire surface to be treated.

Let dry for 24 hours (+20°C).

Apply a generous coat of ProteKto EcoSilan using a short-haired Mohair roller.

Let dry for 24 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of Primer NK evenly over the entire surface to be treated using a short-haired roller and a brush.

Let it dry for 24 hours (+20°C).

Apply a single coat of Hiridium, approximately 1 mm thick, using a stainless steel trowel, evenly and evenly over the entire surface.

Let the product dry for 24 hours (+20°C).

Using an electric polisher connected to a vacuum cleaner, attach the 1000-grit silicon carbide polishing disc and polish the entire surface.

Polish the surface again as before, but replace the silicon carbide polishing disc with a 3000-grit disc.

Apply a first coat of VetroLiquido PRP using a short-haired (mohair) roller for approximately 1/2 square meter, then immediately smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C).

Apply a second coat of VetroLiquido PRP as described for the first.

Let the product dry for 48 hours (+20°C).

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

Lay out the 70/80 g/m² fiberglass mesh, taking care to position it so that it does not crease. Overlap the ends of the mesh by at least 10 cm.

Apply a first coat of Primer Beton using a stainless steel trowel, evenly and smoothly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Apply a second coat of Primer Beton as before.

Let the product dry for 24 hours (+20°C).

Let it dry for 24 hours (+20°C).

Apply a first coat of Hiridium using a stainless steel trowel, evenly and smoothly over the entire surface to be treated.

Let the product dry for 24 hours (+20°C).

Using an electric polisher connected to a vacuum cleaner, apply the 1000-grit silicon carbide polishing disc and polish the entire surface.

Polish the surface again as before, but replace the silicon carbide polishing disc with a 3000-grit disc.

Apply a first coat of VetroLiquido PRP using a short-haired (mohair) roller for approximately 1/2 square meter, then smooth the product with a stainless steel trowel to eliminate any bubbles.

Let the product dry for 12 hours (+20°C).

Apply a second coat of VetroLiquido PRP as you did with the first.

Let the product dry for 48 hours (+20°C).

Viscosity (UNI EN ISO 3219): ~130,000 mPa*s;

Specific Weight (UNI EN ISO 2811-1): ~3 kg (Component A 1.5 kg - Comp. B 1.5 kg);

Dilution after dosing: Ready to use, or in some cases, drinkable water can be added in the percentage necessary for the desired application;

Coverage: ~9 m² (depending on the texture applied, coverage may decrease significantly);

pH: ~9.00;

Recommended application tools: trowel, brush, roller, and spray gun;

Drying time: ~8 hours (+20°C);

Drying time before polishing: ~12 hours (+20°C);

Full hardening: ~72 hours (+20°C);

Packaging: Comp. A 1.5 kg and Comp. B 1.5 kg;

Water and UV resistance without protection: at least ten days after final polishing;

Classification by end use (UNI EN 1062.1-4.1): Decoration and Protection;

Classification by binder type (UNI EN 1062.1-4.2): Non-resin;

Classification by state (UNI EN 1062.1-4.3): Aqueous dispersion;

VOC classification: Complies with Legislative Decree No. 161 of 27/03/2006 (Implementation of Directive 2004/42/EC);

Store in tightly closed original packaging in a dry place between +5°C and +30°C.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.