The elegant fusion of the material solidity of concrete and the aged charm of rust, a decorative effect that expresses character and refinement in perfect balance.

Its surfaces vibrate with warm, oxidized hues, evoking the industrial aesthetic of Corten steel, while the robustness of concrete provides structure and timeless resistance.

Ideal for contemporary spaces with a strong visual impact, Corten Cement transforms walls and floors into exclusive settings, where design meets the strength of natural elements with an authentic and sophisticated elegance.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and seasoned surfaces.

Lay out the 70/80 g/m2 fiberglass mesh, taking care to position it so that it does not crease. Overlap the ends of the mesh by at least 10 cm.

Apply a single coat of Primer Beton evenly and smoothly using a stainless steel trowel.

Let dry for 24 hours (+20°C).

Apply a single coat of Cemento 3D using a stainless steel trowel.

Let dry for 24 hours (+20°C).

Apply Hiridium using a stainless steel trowel in an irregular pattern to create the desired texture.

Let dry for 24 hours (+20°C).

Apply the Patina of the chosen color (Blue, Green, Red) using a sponge or brush to create the desired rust layer.

Let dry for 24 hours (+20°C).

Apply a first coat of Decor Finish using a short-haired roller over the entire surface.

Let dry for 24 hours (+20°C).

Apply a second coat of Decor Finish as described for the first.

Let dry for 12 hours (+20°C).

Apply a third coat of Decor Finish as described for the second.

Substrates must be dry, solid, and free of dust, paint, wax, oil, loose particles, and weathered surfaces.

Apply a single coat of NK Primer evenly over the entire surface using a roller.

Let dry for 24 hours (+20°C).

Apply a single coat of Cemento 3D using a stainless steel trowel.

Let dry for 24 hours (+20°C).

Apply Hiridium using a stainless steel trowel in an irregular pattern to create the desired texture.

Let dry for 24 hours (+20°C).

Apply Patina in the desired color (Blue, Green, Red) using a sponge or brush to create the desired rust layer.

Let dry for 24 hours (+20°C).

Apply a first coat of Decor Finish using a short-haired roller over the entire surface.

Let dry for 24 hours (+20°C).

Apply a second coat of Decor Finish as described for the first.

Let it dry for 12 hours (+20°C).

Apply a third coat of Decor Finish as described for the second.

The written and verbal technical and application instructions provided to buyers and installers are based on our experience and the current theoretical and practical state of the art. They are not binding and do not imply any contractual obligation or secondary commitment arising from the purchase contract. They do not exempt the buyer from personally verifying the suitability of our products for the intended application, at their own risk. The processing cycles indicated above do not constitute any assumption of liability by Nikkolor Italia s.r.l., which is exempt from any liability for problems arising from incorrect installation.