Single-component clear satin and matte protector
PRP GLASS PROTEKT
A high-performance transparent barrier. Protects seamless surfaces without altering their appearance, with a satin or matte finish.
Application
Three layers
Appearance
Liquid glass
Yield
7 m²/L with 3 layers
Packages
2,5 L
Protection, resistance, transparency
The surface becomes
protected.
"Protect without covering: the covering remains the protagonist."
PRP Glass Protekt forms a virtually neutral film that provides long-lasting protection for seamless surfaces, floors, cladding, swimming pools, tubs, fountains, furniture, and doors.
The formulation combines synthetic polymers and modified natural polymers. It is ready to use, requires no dilution, and is available in satin 45 gloss and matte 20 gloss versions.
01
Resistance to water and chlorine
Resistant to chlorinated, ozonated and salt water, marine environments and areas subject to heavy condensation.
02
UV and weather protection
It does not yellow and is resistant to ultraviolet rays, ozone, temperature changes and atmospheric agents.
03
Hydrophobic and oleophobic
Reduces the adhesion of water, oils, dirt and pollutants, making daily cleaning easier.
04
Hygiene and resistance
It reduces the formation of mold and algae, limits bacterial proliferation and resists abrasion and graffiti.
Applications
Protected surfaces.
Long-lasting performance.
PRP Glass Protekt is suitable for continuous vertical and horizontal surfaces, internal and external, subject to water, wear, condensation and atmospheric agents.
01
Floors and coverings
02
Pools, basins and fountains
03
Shower enclosures and wet areas
04
Furniture and doors
05
External continuous surfaces
06
Marine and condensation environments
Application cycle
Protect the surface.
Preserve the material.
PRP Glass ProteKt protects and enhances decorative surfaces with a high-performance, transparent barrier. It preserves the finish's textured appearance, improves weather and UV resistance, and ensures long-lasting protection without altering its color or elegance.
01
Preparation
Make sure the surface is dry, clean, smooth, and fully cured. Mix the product thoroughly.
02
UV and weather protection
Apply PRP Glass Protekt in a single coat with a stainless steel trowel, using one or two colors.
03
Second layer
After 24 hours apply the second layer repeating the same technique as the first.
Third layer
Apply the third coat using the same method, maintaining a thin, uniform thickness.
Hardening
Allow to dry for at least 48 hours. For swimming pools, tubs, and fountains, wait at least 15 days before filling.
Suitable supports
Microcem-FB, Etna, Terra Veneziana, Cemento 3D, MarmUra, ArchiMetal, Hiridium, Metallika XL, Ardhea, Velatura Silossanica.
Key data
Polymers and transparency.
Advanced protection.
Key data are indicative: perception changes depending on light, application technique, and weave orientation.
Superficial interpretations
Chemical protection
It offers good resistance to acidic and basic solutions, chlorine, salt water and aggressive agents.
Protezione ambientale
Protects against UV rays, ozone, condensation, temperature changes and atmospheric agents.
Protection of use
Improves resistance to abrasion, trampling and dirt, making maintenance easier.
Let's discuss your project