Nanostructured polyacrylic protective paint
DECOR FINISH UNIKO
High-performance, water-based, single-component finish—resistant to water, foot traffic, and abrasion, for interior and exterior decorative surfaces.
Application
Two layers
Yield
18 m² 2 layers
Finiture
8/15 gloss
Packages
2,5 L
Advanced protection, beauty preserved.
The finish becomesUNIKA.
"Protects the material, preserves the color, prolongs the beauty of the surface."
Decor Finish Uniko nasce per offrire un livello di protezione superiore alle superfici decorative Nikkolor.
Protegge pavimenti, pareti e rivestimenti realizzati con Microcem-FB, Cemento 3D, MarmUra, Etna e Terra Veneziana, preservandone l'identità materica e cromatica.
01
Superior protection
High resistance to water permeability and effective protection from the very first coat applied.
02
+40% resistance
Superior performance compared to the traditional Decor Finish, with over 40% greater resistance to foot traffic and enhanced protection against wear and abrasion.
03
Ripening in 10 days
It reaches full maturity in just 10 days, cutting the time in half compared to the approximately 20 days required for traditional Decor Finish.
04
Stick to light colors
The neutral finish better preserves light tones without significantly altering their original appearance, with a gloss level ranging from 8 to 15.
Applications
Advanced protection
for every surface.
Decor Finish Uniko is designed to protect floors, walls, and decorative coverings in both indoor and outdoor settings, combining resistance to water, foot traffic, and abrasion with minimal alteration to the surface's original appearance.
01
Floors and coverings
02
Homes and shower cubicles
03
Shops, bars and restaurants
04
Hospitality facilities and professional environments
05
Warehouses and industrial facilities
06
Kitchen splashbacks, furniture and doors
Application cycle
A simple cycle.
Advanced protection.
Decor Finish Uniko is ready to use and is applied by roller in two coats for interiors and three coats for exteriors. Protection begins with the very first application, with optimal performance achieved once the product has fully cured.
01
Surface preparation
Check that the surface is stable, cohesive, clean, dry and free of dust. Do not apply in the presence of residual humidity, infiltrations or rising damp.
02
Product preparation
Decor Finish Uniko is ready to use. Stir thoroughly before application until the product is completely homogeneous.
03
First coat
Apply Decor Finish Uniko evenly using a short-nap mohair roller, distributing the product uniformly across the surface. Protective properties are established with the very first coat.
04
Second coat
Once the first coat has dried properly, apply the second coat, ensuring even distribution. The two-coat process is the standard procedure for indoor applications.
05
Exterior applications
For exterior surfaces, a complete three-coat system is specified to achieve the level of protection required by the system.
06
Suitable supports
Suitable for the protection of decorative surfaces made with Microcem-FB, Cemento 3D, MarmUra, Etna and Terra Veneziana, on floors, walls and coverings.
Key data
Higher performance.
A single finish.
Decor Finish Uniko combines—in a single, transparent, nanostructured polyacrylic formulation—the properties needed to protect decorative surfaces without compromising their character.
Its neutral finish (with a gloss level of approximately 8 to 15) minimizes color shifts in light shades and preserves the surface's original appearance more faithfully.
Superficial interpretations
Wear protection
High resistance to foot traffic and abrasion, with superior performance compared to traditional Decor Finish.
Water protection
High resistance to water permeability, with effective protective capability from the very first coat applied.
Color fidelity
La finitura neutra preserva maggiormente le tonalità chiare, limitando le alterazioni cromatiche e mantenendo l'identità della superficie decorativa.
Let's discuss your project