PAVIMENTI E RIVESTIMENTI - NIKKOLOR ITALIA
  • PHILOSOPHY
  • PRODOTTI
  • Roccia
  • Contatti
  • Catalogo
  • Video
  • Gallery
  • NewsRoom
  • Linguage
    • ENG
    • FRA
    • ESP
    • DES
Foto
Foto
Intended use
PanareaStone is ideal for:
floors, walls, shower cubicles, bathrooms -
for exteriors and interiors -
environments for civil and commercial use -
furniture and furnishing accessories -

Knowledge of the products
even if our application cycle includes only one anchoring primer, it is also true that in front of some types of substrates such as screeds, parquet, wood, etc., ground-floor dwellings, substrates subject to rising damp, etc. have the optimal knowledge to be able to create a solid and effective structure that lasts over time. The Primer is the fundamental basis of the entire application process.
Product
PanareaStone is a molecular powder material resulting from an innovative formulation, premixed in powder composed of quartz sands, selected marble powders, clays, minerals and special additives, it is presented as a material in pure Italian style, used for reasons of practicality and for rooms not subject to variations in humidity and contact with water.

PanareaStone can be used to embellish public and private sites, its multiple effects range according to the creativity and imagination of the applicator, from modern to classic style, from industrial style to rustic.

Perfectly breathable, resistant to mold and bacteria, with excellent workability.​
Foto
Foto
Preparation of the PanareaStone
The package consists of 20 kilograms of powder product, pour 5/6 liters of drinking water into a clean bucket and pour the dye, mix everything so as to dissolve the dye itself, add the product in small doses and mix thoroughly for about five minutes using a mechanical mixer until a homogeneous and lump-free paste is obtained, PanareaStone is now ready to be applied. The mixture remains workable for about eight hours depending on the climatic conditions.

Application method on walls
Apply a single layer of PanareaStone with a thickness of about 3 mm using a stainless steel trowel and cover a surface of 4/5 m2 (in the case of application outdoors or in hot conditions it is recommended to cover a surface of 2/3 m2) , and immediately after drawing the still fresh product with a "doormat" pad or other tools according to the desired creative effect, on average you have to wait about 20 minutes (with ambient temperature not higher than 20 ° useful time for the product to shrink), smooth lightly the surface drawn using the same stainless steel trowel following the pattern drawn in order to flatten only the rough parts.

PanareaStone coloring and protection
During the mixing phase, you can choose to color PanareaStone with universal coloring pastes or with Toner, it is recommended to dissolve the dye in the water before mixing and protect PanareaStone using neutral Siloxanic Glaze, Decor Finish, ProteKto EcoSilan or VL3D with Thickener, especially if you choose to apply PanareaStone inside the shower enclosure or on the external facades.
Foto


PRODOTTI 

ROCCIA

CONTATTI

INFO

TEAM NIKKOLOR 


SCHEDE TECNICHE

CATALOGO

NEWSROOM

GALLERY

VIDEO

Informativa sulla Privacy


VISITA E-SHOP

Foto


Foto

    ISCRIVITI ALLA NEWSLETTER

invia

BRAND
​

Foto
Foto
Foto
Foto
Foto
Foto
Foto
Foto

Foto
Foto
Foto
Foto
Foto
Copyright© 2006 - 2022 by Nikkolor Italia s.r.l. • All rights reserved - P.IVA 01939040893
  • PHILOSOPHY
  • PRODOTTI
  • Roccia
  • Contatti
  • Catalogo
  • Video
  • Gallery
  • NewsRoom
  • Linguage
    • ENG
    • FRA
    • ESP
    • DES