Intended use
Oxital Ruggine is ideal for:
floors, walls, shower cubicles, bathrooms, stairs -
for exteriors and interiors -
environments for civil and commercial use -
suitable for heated floors -
swimming pools, furniture and furnishing accessories -

Knowledge of the products
even if our application cycle includes only one anchoring primer, it is also true that in front of some types of substrates such as screeds, parquet, wood, etc., ground-floor dwellings, substrates subject to rising damp, etc. have the optimal knowledge to be able to create a solid and effective structure that lasts over time. The Primer is the fundamental basis of the entire application process.
Product
Oxital Ruggine is a decorative water-based system for interiors and exteriors composed of copolymers in aqueous dispersion, recycled nano resins, fluid zirconium and selected additives, which allow to create a real rust finish exposed to the elements with variable natural oxidation, formulated to obtain the classic corten effect.
Primer
The substrates to be treated with Oxital Ruggine must be dry and free from dust or dirt. The supports where to apply Oxital Ruggine without the use of primer are various, paper, wood, fabric, etc., but there are some supports such as walls painted with poorly adherent paints or varnished furniture, in that house apply only one layer of primer Plus, if you choose to apply Oxital Ruggine to the floor, the layer must be in 3D Cement (ask our technical support for info).​
Oxital preparation:
Oxital Ruggine is composed of two components, COMP. Paste-based and COMP. B in iron powder. Pour the iron powder in small doses and using an electric mixer with a special whisk mix until a homogeneous paste without lumps is obtained, if necessary you can add drinking water to make the paste more fluid (normally this system is used in presence of warmer ambient temperatures or on highly absorbent substrates), after mixing the product is ready to be applied. After use, the product can be stored for a short period of time, if drinking water has been added it is recommended to consume the product. We recommend mixing only the quantity necessary for the surface to be treated (in the case of small jobs), these data are provided based on the studies carried out in our laboratories, it is the responsibility of the installer to read the technical data sheet before use, alternatively you can contact our technical support.
Oxital Rust Application:
Spread a single layer of Oxital Ruggine with a stainless steel trowel in order to obtain the desired effect and optimal coverage. Wait about 8 hours and apply one or more coats of Oxital Reagente using a Spalter brush, sponge or spray. Oxital Ruggine can be diluted with drinking water from 10% max 50% for brush application and to obtain textures different from traditional ones, after dilution Oxital can be kept for a short period of time.
Oxital Reagent Application:
Oxital Reagent is ready to use and must not be diluted, it is applied using a spalter brush, a sponge, a sprayer or any other tool you wish to use, the consumption of the reagent varies according to the tool used and how many passes are applied to obtain the desired rust layer, in the case of several coats it is necessary to wait about four hours between one layer and the other, let it dry for at least 24 hours.
Finitura trasparente
Decor Finish è una Vernice trasparente poliacrilica nanostrutturata a base acqua, monocomponente di ultima generazione, semilucida, opaca e antisdrucciolo, impermeabile e carrabile sia in ambienti interni che esterni. 

Perfetta riuscita dei lavori
uno dei fattori principali per una buona riuscita di un pavimento è non essere superficiale nella valutazione dei piani di posa che pregiudicano la buona riuscita di una superficie continua, la stesura, i tempi di applicazione e la pulizia degli ambiente è fondamentale per la perfetta riuscita di un pavimento o rivestimento in Oxital Ruggine.
Decor Finish application:
Once the desired rust layer has been obtained, apply matt or semi-gloss Decor Finish as final protection, apply a first layer of Decor Finish using a spalter brush or mohair roller and wait about 6 hours, apply a second layer of Decor Finish.