Marble ceramic coating
MarmUra is ideal for:
floors, walls, shower cubicles, bathrooms, stairs -
for exteriors and interiors -
environments for civil and commercial use -
suitable for heated floors -
swimming pools, furniture and furnishing accessories -
Knowledge of the products
even if our application cycle includes only one anchoring primer, it is also true that in front of types of substrates such as some screeds, parquet, wood, etc., ground-floor dwellings, substrates subject to rising damp, etc. have the best knowledge to be able to create a solid and effective structure that lasts over time. The Primer is the fundamental basis of the entire application process.
Preparation of Beton KA+KB
Pour about 3/3.5 liters of KB into an empty and clean bucket and pour the KA in small doses, mix with a mechanical stirrer until a homogeneous and lump-free paste is obtained. The mixture remains workable for about three hours depending on the climatic conditions. It is recommended to color Beton KA+KB in the same color as MarmUra.
Application on screed
On an existing screed floor or covering that has been cured for at least 28 days, it is advisable to make sure that there are no cracks, proceed with the spreading of BETON KA+KB using a 3mm stainless steel trowel and with the product still fresh lay over the mesh in glass fiber of 70/80 gr/m² and immediately smooth the treated surface with the smooth side of the trowel in order to level the product and drown the net inside the still fresh mixture and make the surface uniform, continue with the same procedure for the whole surface.
Application on tiles
On a floor or wall with old tiles it is advisable to make sure that they are well anchored and free from oils and greases, proceed with the spreading of BETON KA+KB using a 3mm stainless steel trowel and with the product still fresh smooth the surface treated with the smooth side of the trowel in order to level the product, continue with the same procedure for the entire surface.
MarmUra is an innovative one-component ready-to-use paste for the coating of very low thickness internal and external floors and walls, with great performance in terms of yield, mechanical strength, flexibility and processing, applicable to both new screeds and old existing floors. MarmUra is a highly professional product that must only be colored, mixed and applied. Thanks to the absence of epoxy resins, MarmUra has a total absence of yellowing.
Blend, colors and perfect application
it is always assumed that the pigments, coloring pastes or toners used to color the products are the same. Behind each color proposed by the manufacturer there are various studies and very strict laboratory tests and it is precisely for this reason that it is necessary to know first of all the mixing of the dyes and that of the product itself.
Application of MarmUra
Before starting the application, mix the crystal spheres with an electric mixer, MarmUra can be diluted with drinking water max 5% depending on the temperature or texture to be created.
Apply a first layer of MarmUra using a stainless steel trowel and taking care to give the surface the desired texture and leave the product to dry for 12 hours.
Apply a second layer of MarmUra to perfect leveling and obtain the desired aesthetic effect and leave the product to dry for about 24 hours. At this stage it is essential to use a specific stainless steel trowel that does not cause unpleasant greyish burns.
If you want to obtain a surface that is perfectly smooth and soft to the touch, after drying the second layer of MARMURA, sand the entire surface using a random orbital sander with 120 grit sandpaper.
Perfectly vacuum all traces of dust and clean with a damp cloth in order to perfectly de-dust the surface.
Decor Finish is a water-based nanostructured transparent polyacrylic paint, one-component of the latest generation, semi-gloss, opaque and non-slip, waterproof and suitable for both indoor and outdoor use.
Perfect success of the works
one of the main factors for the success of a floor is not to be superficial in the evaluation of the laying surfaces that compromise the success of a continuous surface, the drafting, application times and cleaning of the environment is essential for the perfect success of a floor or wall covering in MarmUra.
Preparation of the Decor Finish
Decor Finish is ready to use, do not add water or dyes, after shaking the product well, pour it into a clean bucket, the yield of Decor Finish is about 10 m² in three layers.
Application method of Decor Finish
For the correct application of the Decor Finish it is essential to use a Mohair 04 roller, spread a first layer of Decor Finish evenly over the entire surface, taking care to spread the product well and go over it several times until completely absorbed. 'application should be done following cross movements and no excess product should be left, in this way we will obtain a compact