Intended use
Marblex Mirror ​is ideal for:
coatings, bathrooms, furniture and furnishing accessories -
for exteriors and interiors -
environments for civil and commercial use -
adheres to almost all surfaces such as glass, paper, wood -

Knowledge of the products
even if our application cycle does not require the use of a specific primer, it is also true that in front of types of substrates you need to have the best knowledge to be able to create a solid and effective structure that lasts over time. The Primer is the fundamental basis of the entire application process.
Product
Marblex Mirror is a mirror marble effect finish for exteriors and interiors. It develops excellent adhesion and flexibility qualities while maintaining both colors and appearance over time. In addition to decorating and enriching the walls, Marblex Mirror can be applied both on external facades and inside shower enclosures. Its innovative formulation is obtained by using some of the finest raw materials that give excellent mechanical properties, remarkable qualities of chemical resistance, an effective obstacle to the formation of mold and bacteria, and in particular an extraordinary ability to oppose the spread of flames and the development of fumes.
Primer
The substrates to be treated must be dry and well anchored, apply a single coat of Primer NK diluted max 10% with drinking water, the use of Primer NK allows you to apply Marblex Mirror on various substrates such as; glass, ceramic, marble, wood, metal, PVC, forex, MDF, laminate etc...
Application
Apply Marblex Mirror in two coats using a stainless steel trowel. After 8 hours from the application of the first coat, apply a second thin layer of the product, uniforming it until a flat and smooth surface is obtained and wait 8/12 for the product to dry in depth.
Polishing
After drying, proceed with polishing the treated surface using polishing discs in silicon carbide of grain 1000 and 3000 using an electric polisher connected to a vacuum cleaner, after polishing it is advisable to wipe with a soft cloth to remove any traces of dust, it is possible to apply Marblex Mirror ​Medium-thick or multi-colored single-layer micro-resin.
Transparent finish
ProteKto EcoSilan is an ecological colorless finish composed of a chain of silicon atoms and nano particles and a blend of silanes and siloxanes in aqueous emulsion, it penetrates deep into the capillaries of the support making it hydrophobic and at the same time breathable, non-film-forming with permanent action , resistant to UV rays, does not yellow in any environmental and aging conditions, it leaves the surfaces treated in a natural way.

Rules of use and recommendations
ProteKto EcoSilan is ready for use and must be applied using one of the following tools; brush, mohair roller, manual or airless spray.

Application
The surfaces in Marblex Mirror ​must be dry, apply a single layer of ProteKto EcoSilan and wait about 15/20 minutes, eliminate traces of excess product using absorbent paper, immediately after wiping a soft cotton cloth over the entire surface and leave to dry for at least 3/4 days, maximum resistance to water repellency is obtained after about 7/10 days.